====================================================================
 Instruction sheet
 Printing sample program for Windows 2000/XP
====================================================================
Table of Contents

  1. Outline
  2. Function control
  3. Operating Systems
  4. Installation
  5. Boot
  6. Note


------------------------------
1. Outline
------------------------------
�@This software is designated for printing Sanei thermal printers. 
  The data is easily printed by booting up this software. 
  The attached source codes are allowed to understand use of each
  command and it is possible to modify the software if there is the
  developing tool. (Microsoft VC++6.0)

------------------------------
2. Function control
------------------------------
�@This software conforms to ESC/POS commands.
  When the different command other than ESC/POS is used, the button 
  does not always work for the sample program properly. Some Sanei 
  printers do not comply with ESC/POS. For more detail information,
  refer to the Technical Guide of the printers.

------------------------------
3. Operating Systems
------------------------------
�@This software is applicable for Windows 2000 and Windows XP.

---------------------------
4. Installation
---------------------------
  4-1. Print sample program
       Make a copy of this software into the PC.
  4-2. BL-112 driver
       Download the �gBL-112 printer driver�h from Sanei website.
       For instruction of the driver, refer to the driver instruction.
       Also set �gSANEI BL-112�h as default value.
  *: BL-112 is chosen as the printer driver for the purpose of setting
     a printer port. Sanei printers should be used for this BL-112 
     driver regardless the model name.

---------------------------
5. Boot
---------------------------
  1. Open the �gProperty�f of BL-112 from the dialog for �gPrinter 
     and FAX�h,and select the right port. When the COM port is selected,
     adjust the communicating conditions to the printer at �gConfigure Port�h.�@
  2. Execute Kisok App.exe, then the dialog of Menu appears.
  3. Press the favorable button to start printing.

---------------------------
6. Note
---------------------------
1. When the printer does not print by serial communication (COM:), the
   control flow of both PC and the printer should be changed to Xon/Xoff.
2. When BS2-80 is used, set the command systems to ESC/POS by the DIP switch.
3. When BL2-58 is used, set the �gCOMMAND MODE�h to �gMODE A (ESC/POS)�h.
4. Make sure the PC is installed for latest Windows service pack
======================================================================